This is an entry-level blister packaging machine. Suitable for start-ups, laboratories and individual users. Thermoforming of general purpose PVC and cold forming of ALU. Suitable for food, pharmaceutical, cosmetics, stationery and hardware industries. Simple operation and high efficiency.
Advanced packaging capacity, suitable for food, pharmaceutical, stationary, cosmetics, hardware and other industries with large output. Mainly used for blister packaging of tablets, capsules, honey, tool chocolate and other products. Cutting speed is 25-50 times per minute for ALU/PVC blisters.
Higher-end configuration, fast processing capacity. Manufactured according to cGMP standards. Easy and quick changeover without tools. PLC controlled, parameters are set via HMI on a touchscreen. AISI 304 stainless steel cover. Cutting speed is 25-50 times per minute for ALU/PVC blisters.
Suitable for stationery, daily necessities, cosmetics, food, medical equipment, electronics, hardware, auto parts and other industries. This packing form is commonly used in batteries, razors, correction fluids, syringes, toys, scissors, spark plugs, lip balm, etc. PLC (OMRON) controlled, parameters are set via HMI on a touchscreen.
Designed for cartoning products into large boxes of 150-∞ x 150-500 x 140-500 mm in size. In addition to standard specifications, non-standard customization is available. To operate the machine needs compressed air supply with a pressure of 0.6 MPa. Conveyor speed is 18 m per minute.
Designed for sealing cases with products inside. Applicable carton size must be within 300-500 x 150-500 x 150-500 mm. Sealing speed is 4-6 cases per minute. Suitable for narrow and light cartons. Stainless steel rack comes as an option. Equipped with an automatic folding mechanism.
Designed for erecting cases, i.e., unpacking, forming, folding and pasting the tape on the bottom of the case. Easy operation, the machine can be used as a stand alone device or as a part of a production line. Productivity is 12 cases per minute.
Designed for cartoning products into boxes of 65-180 x 65-80 x 30-80 mm in size. Widely used in food, pharmaceutical, cosmetics, hardware, stationery and other industries. To operate the machine needs compressed air supply with a pressure of at least 0.6 MPa. Encasing speed is 40 – 60 boxes per minute.
Designed for cartoning products into boxes of 65-220 x 65-130 x 30-80 mm in size. PLC controlled, parameters are set via HMI on a touchscreen. To operate the machine needs compressed air supply with a pressure of 0.5 – 0.7 MPa. Encasing speed is 50 – 80 boxes per minute.
Designed for cartoning products into boxes of 65-260 x 65-200 x 30-80 mm in size. PLC controlled, parameters are set via HMI on a touchscreen. To operate the machine needs compressed air supply with a pressure of 0.5 – 0.7 MPa. Encasing speed is 40 – 60 boxes per minute.
