WBS-1 Semi-automatic bottle blowing machine is special for the bottle from 4L-7L. Also suitable for producing plastic containers and bottles from 10-2000ml. It is widely to produce Soda bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle, wide-mouth bottle etc. Theoretical output: 500 pcs/hr
WBS-4 (2 blowers and 1 heater) Semi-automatic plastic bottle blow molding machine is suitable for producing plastic containers and bottles from 10-2000ml. It is widely to produce Soda bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle, wide-mouth bottle etc. Theoretical output: 1800 pcs/hr
WBS-1-10 plastic bottle making machine blows bottle from 5L-10L, 5L 2 cavity, 10L 1cavity. With low inverestment and easy operation. Theoretical output: 150-500 pcs/hr
WBS-1-20 Semi-automatic 19L blow molding machine blows PET bottle from 10L-20L, neck size from 45mm-200mm. Two modes of operation: semi-automatic mode and automatic mode. Small size, low investment, one person enough to operate, simple and safe. Theoretical output: 90 pcs/hr
WBMS-3 and WBMS-4 Semi-automatic 3 cavity and 4 cavity PET blowing machine blows PET bottle from 0.1-1.5L, neck size from 18mm-30mm. Theoretical output: 1500 pcs/hr
WBM-3 is a two-step method full automatic water bottle making machine. The max. capacity is 1.5L, suitable for blowing PET water bottle, juice bottle, carbonated bottle and some other common bottles. Theoretical output: 2200 pcs/hr
WBB series is one kind of two-step automatic PET blowing machine. This type of automatic PET blowing machine has 3 cavity and 4 cavity, which is suitable for blowing any shape of PET bottles, such as carbonated bottles, water bottles, juice bottles, oil bottles, etc. Theoretical output: 3300 pcs/hr
WBB-4HS 4cavity automatic PET blow molding machine with double servo motor (moving perform and clamping system) output 6000bph, which is suitable for blowing any shape of PET bottles, such as carbonated bottles, water bottles, juice bottles, oil bottles, etc. Theoretical output: 6500 pcs/hr
WB series is a two-step PET stretching blow molding machine with full servo motor drive(clamping servo, stretching servo, transfer preform servo, separating preform servo). Also with the advantage of fast speed, converse energy, pressure air recycle, less floor space. Suitable for mineral water bottle, gas bottle, juice bottle, oil bottle, medical bottle and so on. It has 4/5/6/7/8/9/10 cavity, the production from 5500-15000 pcs/hr.
WBB-4SS 4cavity automatic PET plastic bottle blowing machine with 3 servo motor (moving perform and clamping system and stretching system) output 7200 bph, which is suitable for blowing any shape of PET bottles, such as carbonated bottles, water bottles, juice bottles, oil bottles, etc.
