The monobloc machine can finish measuring, filling, capping, etc. Due to original design, it is more suitable for packing powdered material that is easy to flow, like veterinary drug, sugar, glucose, carbon dust, talcum powder, essence etc. Except the motor, the shell of the whole machine is 304 stainless steel, and the powder contact part is SS 316. PLC controlled, parameters are set via HMI on a touchscreen.
This machine is suitable for producing milk, lactobacillus, soymilk, juice and beverage, etc., it is used to fill the bottle with normal pressure, automatic lid and electric heating seal. The whole process is automatic, which is applicable to glass bottles, polyester bottles and new material bottles. PLC controlled, parameters are set via HMI on a touchscreen.
The machine is widely used in pharmaceutical, food, cosmetic and daily chemical industries to fill ointment or viscous fluid materials into plastic tube or laminated tube and seal the tube tails, trim the tails and print code on tubes automatically. PLC controlled, parameters are set via HMI on a touchscreen. Easy to operate, convenient and stable.
This machine is used in pharmaceutics, foodstuffs, cosmetics, daily chemicals for smooth and accurate filling of all kinds of pasty and viscous fluid and materials alike into metal tubes and then carry out tube end folding, sealing and lot number embossing. PLC controlled, parameters are set via HMI on a touchscreen. All material contacting parts are made of 316L stainless steel, clean, sanitary and conforming to GMP.
The stand spouted pouch-packing machine consists of pouch supply, filling, cap supply, cap sorting, capping parts and it is fully automatic. This machine is applied for filling different kinds of liquids, semi-liquids, such as juice, yogurt, water, jelly, soy milk, cooking oil, liquid soap etc. tomato sauce, Jam, chocolate spread etc. The machine is made of stainless steel 304.
Automatic cup filling sealing machine is widely used in food industry to produce products such as jelly, juice, water, yoghurt, puree, instant noodles, soy milk, popcorn, snack, sauces etc. It can load cups, fill products into cups, seal cups by roll film/ precut film, putt plastic lid and output automatically. The product contact parts are made of stainless steel, which is produced in strict accordance with the food industry hygiene standards. Plastic tray and odd shaped trays, can be customized as per the customer’s requirements.
The machine can deliver cups automatically. The sealing film is pre-cut film or film in roll; the high automatic machine can improve the production process efficiency, reduce the manual operation steps, and improve the sanitary condition. This machine is with mature and reliable design, with good stability.
This production line is suitable for automatic canning, labeling of nuts, candied fruit, melon seeds, jams, roasted seeds, salted vegetables, fruits, etc. The production line is fully automatic from bottle feeding, automatic quantitative filling, sealing, plastic cover pressing, labeling and coding, which greatly saves manpower and improves production efficiency. According to the needs of users, it can also be equipped with a liquid injector to produce salted vegetables and canned fruits.
The machine can automatically unload empty cans, unscramble them, disinfect, fill with powders, seal the cans, remove dust from full cans, code them with coding machine, press plastic lids on cans, carton them and palletize. Production capacity is 20 – 45 cans per minute. Filling volume is 100 – 500 g. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.7 MPa.
This machine is a device developed exclusively based on digesting and absorbing domestic and international pop can filling and seaming machine. It adopts the normal pressure filling principle. The machine is PLC controlled; parameters are set via HMI on a touchscreen. The main motor and other electrical components are placed in protected area. The main electric and pneumatic components of the machine are famous imported brands.
