The machine is designed for widemouth bottles, including thread cap screwing of large caliber glass and plastic bottles for fermented bean curd, pickles and pulps. Equipped with advanced HMI and PLC control. The machine can work with caps 30 – 100 mm in diameter, bottles with 50 – 100 mm in diameter and 50 – 200 mm in height.
The machine is used for cap screwing of round bottles, rectangular flat bottles or oblate bottles. Equipped with advanced HMI and PLC control. The machine can work with caps 19 – 55 mm in diameter, bottles with 23 – 100 mm in diameter and 45 – 320 mm in height.
The machine is used for capping round and square bottles for food, medicine, cosmetics and chemicals. Equipped with advanced HMI and PLC control. Major components are made of 304 stainless steel. The machine can work with a screwing speed 10 – 40 bottles per minute.
The machine is used for capping of bottles of which mouth height is consistent with or higher than the body height. Equipped with advanced HMI and PLC control. Major components are made of 304 stainless steel. The machine can work with a screwing speed 10 – 40 bottles per minute.
The machine is used for capping and screwing duckbill caps and plane caps of varied bottles for food, medicine, cosmetics and chemicals in inflammable and explosive dangerous production places. Cap screwing speed is 20 – 50 bottles per minute. The machine can handle caps with diameter 15 – 100 mm and bottles 15 – 100 mm in diameter and 30 – 300 mm in height.
The machine is used for capping and sealing of bottles for soy source, vinegar and vegetable oil. Equipped with advanced HMI and PLC control. Automatic cap stamping and cap hanging; afterwards, bottles are calibrated before being fed to the capping mechanism by the bottle-clamping belt. The machine can handle caps with diameter 45 – 160 mm and bottles 50 – 110 mm in diameter and 60 – 300 mm in height.
The machine is used for capping plane caps of round, square and oblate bottles for food, medicine, cosmetics and chemicals. Equipped with advanced HMI and PLC control. Hand wheel regulation; it can apply to varied bottle caps within the scope of this machine without replacement of parts. The machine can handle caps with diameter 15 – 55 mm and bottles 20 – 55 mm in diameter and 100 – 320 mm in height.
The machine is used for capping and screwing vacuum plane caps of glass bottles for food, medicine, cosmetics and chemicals. Equipped with advanced HMI and PLC control. Automatic screwing is integrated with vacuuming. The machine can handle caps with diameter 37 – 70 mm and bottles 40 – 85 mm in diameter and 80 – 180 mm in height.
The machine is used for labeling varied square bottles for food, medical purpose, cosmetics and petrochemical use and is equipped with an advanced HMI operation, PLC control. Hand wheel adjusting knob, convenient adjustment, and simple use. Step drive, allowing labelling speed at up to 80 bottles/min; label dimension is 15-120 (W) x 15-350 mm (L).
The machine is used for labelling of glass bottles, it has an integrated control panel, made of 304 stainless steel and aluminium alloy. Simple adjustment of labels and labelling speed, the machine is equipped with photoelectric detection of labels. Labeling speed is at up to 80 bottles/min; label dimension is 40-100 (W) x 50-220 mm (L).
