The machine consist of hopper, vibrating chamber, coupler and motor. There are eccentric wheel, rubber software, main shaft and shaft-bearing in the vibration chamber. The adjustable eccentric hammer is driven to the center line through the motor, cause centrifugal force under the state of unbalance and so that the materials form regular eddy.
The Machine consists of screen box at material inlet and outlet, vibrator and shock absorber. There are 4-6 sets of flexible rubber shock absorber connected between base and screen box in up-down order. Centrifugal force is generated upon starting the machine.
The powder granule in vessel (fluid bed) appears in the state of fluidization. It is preheated and mixed with clean and heated air. At the same time the solution of adhesive is sprayed into the container. It makes the particles become granulating that contains adhesive. The process is carried out continuously till it forms ideal, uniform and porous granules.
The machine is used in pharmaceutical industry for production of tablets, medicinal granules, capsule granules with or without sugar. It can be use in food industry to produce cocoa, coffee, milk powder, juice of granules, flavoring and so on. And it can be used for producing pesticides, feed, chemical fertilizer, pigment, dyestuff and so on.
The machine is used for the powder raw materials and adhesives in a cylinder to be fully mixed at the bottom to become a humid soft material. Then it is cut by high-speed cutter and becomes uniform granules. Capacity depends on the model and varies from 3 to 280 kg per batch.
This is a new type of solid ingredients/ material preparation equipment, that integrates granulating, coating, fluidizing and rotating granulating together. It is mainly applicable for granulating, pill making and coating in pharmaceutical, chemical, foodstuff and so on industries, such as granules to be pressed to tablets, or to be filled into capsules.
The machine is suitable for mixing the powder and grain state materials in pharmacy, chemical, food, building material and other industries. The powder is loaded through the vacuum conveyor for the machine. It can be loaded manually as well. It is energy saving, easy for operation, the labor intensity is low, and the working efficiency is high.
This mixer mainly consists of three big parts, rotating cylinder, swinging rack and frame. The rotating cylinder lies on the swinging rack, supported by four wheels and its axial fixation is done by two stop wheels. Two of the four wheels are driven by rotating system to make the cylinder rotate.
The mixing barrel of the machine moves in multi-direction. For the materials, there is no centrifugal function, without the specific gravity segregation and the layer division. For each of build-up phenomenon, there is the remarkable weight rate. The mixing rate is high. The machine is the desired one of various mixers at present.
Materials are charged into a closed square-cone mixing barrel, the symmetrical axes of hopper and the axes of rotating shaft form an included angle, materials with different constituents are strenuously rolling over in the closed hopper and producing high shear to achieve the best effect of mixing.
