The machine is designed for capping canned food, beverage, condiment, medicine and chemical products. This machine is applicable for both vacuum sealing and non-vacuum sealing. Applicable bottle diameter must be within 40 - 85 mm, bottle height must be within 65 - 260 mm. Cap diameter must be within 30 - 85 mm. To operate the machine needs hot steam under pressure of 0.4 MPa.
The machine is used to sort the polyester bottles, and the scattered bottles are sent to the bottle unscrambler through the hoist. Capacity is up to 12,000 BPH. Applicable bottle diameter must be within 45 – 90 mm, bottle height — 75 – 240 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
The machine combines the bottle infeeder machine and unscramble bottle machine. It can be used with filling production line. Capacity is up to 12,000 BPH. Applicable bottle diameter must be within 45 – 90 mm, bottle height — 75 – 240 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This rotating bottle feeder machine uses eccentricity from disc rotation, it will send the bottles to the conveyor under the action of bottle guide board, then into the next process. This machine is suitable for Φ30-100 mm cylindrical shape bottles unscrambler. Machine uses frequency to adjust speed, the whole machine use SS304 and with long durability. Unscrambler speed can achieve 7,000 bottles/hour.
The machine is designed for filling bottles with viscous liquids. Applicable bottle diameter is not more than 160 mm. Applicable bottle height is not more than 350 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa. Output is up to 1800 BPH.
This series filling machine is a high-tech filling equipment controlled by microcomputer PLC program which equipped with optical, mechanical, electrical sensors, pneumatic action. Material filling adopting sanitary stainless steel rotor pump can achieve precise measuring under servo motor control.
The machine has simple structure, convenient adjustment; production speed is fast, high pass rate, after cap pressing has good performance, it suitable for cap pressing of foodstuff, soy sauce, vinegar, vegetable oil in bottles. Applicable bottle diameter must be within 50 – 110 mm, bottle height — within 150 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic inline capping machine has four speed-adjustable motors, which separately used in lid arranging, bottle clamping, lid capping and conveying. Applicable bottle diameter must be within 50 – 110 mm, bottle height — within 150 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic inline capping machine has four speed-adjustable motors, which separately used in lid arranging, bottle clamping, lid capping and conveying. Applicable bottle diameter must be within 35 – 140 mm, bottle height — within 50 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This capping machine is dedicated to inline capping of the lid with nozzle and gunner cap, used in daily chemical and cosmetics industries.
