These two-step PET stretch blow moulding machines are applicable in a wide range of PET packaging practice, such as for beverages, edible oil, food, pharmaceutical products and cosmetics, etc. Applicable bottle size is 0.1 – 2 L. Capacity is 4000 – 5500 BPH.
These two-step PET stretch blow moulding machines are applicable in a wide range of PET packaging practice, such as for beverages, edible oil, food, pharmaceutical products and cosmetics, etc. Applicable bottle size is 0.1 – 2 L. Capacity is 7000 – 9000 BPH.
Automatic sleeve shrink labeling machine all-cover type stainless steel host machine: the whole machine is waterproof as well as restless. Adjustable cutter head: uniquely cyclotron cut-off, double-sided cutting edge with long service life.
The machine is made of 304 stainless steel and is used for liquid filling into bottles. It can work with PET circular or square bottles. Applicable bottle diameter is 50 – 120 mm. To operate the machine needs compressed air supply with a pressure of 0.3 - 0.7 MPa.
This automatic mineral water filling machine is mainly used in water filling operations, it has three functions of bottle washing, filling and capping are composed in one body of the machine, the whole process is automatic, it is convenient to adjust the machine to fill various types of bottles. It can work with PET bottles with screw caps.
Capacity of this machine is 6000-8000 Bottles Per Hour, bottle Size is 250 – 2000 ml. This is a 3 in 1 machine and it can wash, fill and cap bottles. Capacity is up to 10000 bph. To operate the machine needs compressed air supply with a pressure of 0.3 - 0.7 MPa.
This machine is mainly used in water filling operations, it has three functions of bottle washing, filling and capping in one body of the machine. The whole process is automatic; it is conveniently adjusted to fill various types of bottles. PLC controlled, parameters are set via HMI on a touchscreen. It is an ideal preferred equipment for beverage maker.
This is a 3 in 1 machine, which can wash, fill and seal bottles. The machine adopts a bottle mouth delivery mode and only needs to change very little change parts. It can be applied to a variety of bottle type and smooth transportation. The filling method is high pressure filling.
This is a 3 in 1 machine, which can wash, perform hot filling and seal bottles. The system gives full consideration for beverage’s characteristics (e.g. it is easy to have foaming for tea beverage and mixed juice.) and main technical requirement of hot filling. PLC controlled, parameters are set via HMI on a touchscreen.
