Suitable for Food and Beverages, Chemicals, Pharmaceuticals, Cosmetic applications and other allied companies / industries. The machine designed as per GMP standards. Filling nozzles are made of SS 316, all exposed parts — SS 304. “No vial — no filling system”. Height adjustment to match with other machines in line. Can run dry and wet rubber stoppers and supplied with liquid collecting tray. Minimum change over time, from one size of container or fill size to another.
Machine works on volumetric principle with diving nozzles. Filling volume: from 5 to 1000 ml. Filling accuracy on single dose is ± 1%. Output: 3,600 – 9,000 containers per hour, depending on container/neck size and filling volume. The conveyor height is adjustable within 860 – 910 mm. Drip tray under the conveyor.
Machine works on volumetric principle with diving nozzles. Filling volume: from 5 to 1000 ml. Filling accuracy on single dose is ± 1%. Output: 5,000 – 12,000 containers per hour, depending on container/neck size and filling volume. The conveyor height is adjustable within 860 – 910 mm. Drip tray under the conveyor.
Compact, but at the same time very efficient machines of this line seal containers by ROPP caps. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Motorized Height Adjustments. Built in front control panel.
Filling volume: from 50mg to 1.5g. Filling accuracy: ±1% under controlled humidity of 25%. Conveyor height is adjustable within 800 – 850 mm.
Total Compact Monoblock cGMP model. All parts and assemblies coming in contact with powder are made of S.S.316. Filling in containers with ROPP cap. Sterilized dry containers are fed by turntable. The sterilized powder is stored in powder hopper and agitated for maintaining consistency and uniform bulk density.
Compact but efficient machine for dry powders filling. There are two separate filling head mounted on machine top plate in the same line. Pneumatic bottle holding system directly connected with Auger rotation electronically. All parts and assemblies coming in contact with powder are made of S.S.316. "NO BOTTLE, NO FILL"
Filling head is mounted on machine top plate. Pneumatic bottle holding system directly connected with Auger rotation electronically, so that PLC can store auger rotation time for future use. All parts and assemblies coming in contact with powder are made of S.S.316. "NO BOTTLE, NO FILL" system.
Monoblock type, high-speed machine that has injectable dry powder filling, vial liquid filling & rubber stoppering machine in one frame structure. In this machine you can use powder filling and liquid filling together or you can use any one (i.e. Either powder filling or liquid filling). Accuracy (Powder filling): +- 1%
Model –PFS-SA-10 is very compact and elegant PLC controlled machine in compliance with cGMP and encompassed with stainless steel 304 structure. Output: 2600 to 7200 Syringes/hour. Peristaltic pump for filling syringes. Chamber flush with nitrogen.
