The NRC-40 capping machine is designed to handle a wide variety of caps ranging from 10-70mm in width. It is a heavy duty, self-contained, automatic “in-line” capping system that is specifically designed to handle various size caps from bulk, orient, place them on a container, and tighten them at a predetermined torque.
High Speed Inline Capping System model NRK-400 is an automatic In-line capping machine encompassing some of the best features to provide reliable and very fast operation. It can handle cap sizes of 10-70mm at speeds of up to 300 per minute with start/stop controls, and comes with our H-26 cap hopper/sorter, or optional HES-12.
The S-30 is a heavy duty, self-contained, automatic, “chuck" style, capping system. It is specifically designed to be highly versatile, with fast changeover. It will apply caps at a rate of up to 60 per minute, depending upon cap size. It comes equipped with our H-26 vertical dial pin hopper/sorter, which is one of the best on the market today.
The NRC-20 is a self-contained “In-line” capping system designed for tightening caps or pump/trigger sprayers. This capper is small and compact, allowing you to roll it up to an existing conveyor line with ease. A simple hand crank height adjustment allows for quick and easy changeover without the need for tools.
The PSP is designed to run containers with pump tops continuously along a moving conveyor. Fully Automatic Pump Sorter Placer is designed for sorting, feeding, and placing product pumps into filled containers. It comes complete with Start/Stop controls, and a bulk supply Hopper/Elevator, Pump/Sorter/Feeder/Placer for pump assemblies.
The NRX-4000 In-line Capping System is a breakthrough in machinery design. It is the first In-line capper to reach the 600 cap-per-minute speed, and has 18 patents approved by the US patent office. NRX-4000 comes equipped with our H-42 hopper/sorter or our HES bulk cap hopper/elevator/sorter depending on your needs.
The RW-500 is the first Inline capping system designed to handle large size containers up to 2½ gallon, with caps up to 150 mm. It can handle speeds up to 300 per minute for smaller caps, and over 150 per minute with large size caps. The RW-500 comes equipped with our HES-12 (Hopper Elevator Sorter with 12" wide cap flights) for speedy bulk cap sorting, or optional HES-24 or HES-30 for higher speed cap delivery.
The S-51 is a heavy duty, self-contained, automatic, “chuck" style, capping system. It is specifically designed to be highly versatile, with fast changeover. It will apply caps at a rate of up to 60 per minute, depending upon cap size. It comes equipped with our HES (Hopper / Elevator / Sorter), standard 9’6” conveyor, and a NEMA-4 control panel.
It is a fully automatic cap fitment machine is designed to place plugs and fitments onto containers moving in groups along a conveyor. It can handle a wide variety of container sizes, and the 4 stations gives it a significant edge in speed over our traditional single-head chuck capper. It comes complete with HES (Hopper Elevator Sorter) to promote steady cap feeding.
The NRT-20 in-line cap torqueing system is designed to ensure proper cap tightness when a simple capping machine or two-station retorquer is not enough. This retorquer finds its niche in high-speed applications, or for products that must maintain precise closure tension. It comes with our NEMA 4 control panel, electronic safety interlocks, complete enclosure, and 8’ of conveyor.
