Designed for linear liquid or syrup filling in bottles and screw capping. Equipped with system “No bottle — no filling, no bottle — no capping”. Eight filling heads are installed on the machine. Works with 40 – 200 ml glass and plastic bottles. Capacity: 40 – 60 bottles per minute.
Designed for air blow and vacuum sucking cleaning of bottles,rotary liquid or syrup filling in bottles and screw capping. Equipped with system “No bottle — no filling, no bottle — no capping”. Eighteen filling and 9 capping heads are installed on the machine. Works with 50 – 200 ml glass and plastic bottles. Capacity: 120 – 180 bottlesperminute.
Designed to mix dry powder or granule materials. Evenness of mixing: 99%, charge coefficient: 50-80%. Charge-in time: 15 – 30 times. Volume of the mixing barrel depends on the model and varies between 400 and 1200 L.
Designed to mix powder material, excipients and moist bonds to extrude compact cylindrical granules,which are prepared for spheroidizing pellets. Output diameter: 0.4 – 3 mm. Capacity depends on the model and varies between 3 and 120 kg per hour.
Designed to spheroidize compact cylindrical granules to get final pellet. Input granule diameter 0.4-3.0mm, output pellet diameter 0.4-3.0mm. Finished product rate: more than 90%. Cycle time: 2 – 10 minutes. Capacity 0.1 – 0.6 kg (lab model) and 1.0 – 8.0 kg per batch (industrial model).
This machine can automatic load the tray of syringe, automatic filling the syringe and automatic plug the stopper and automatic unloading the tray. Made of aluminum alloy or stainless steel, completely meets GMP standards.
This machine is suitable for filling and sealing of the pre-sterilized pre-fill syringes. Filling volume from 0.5ml to 3ml, and 3-20ml if change filling pump. All contact parts are made of AISI 316L, tubes are made of pharmaceutical silicon, other surfacesare SS304, which meets cGMP requirements.
Designed to form sachets, fill them with products, seal and emboss marksat a high speed. Can pack granules, powders and liquids, if filling system is changed. Sachet size and volume depend on the model and its capacity can reach up to 300 ml.
Designed to form sachets, fill them with products, seal and emboss marks. Equipped with different filling system for granules, powders and liquids. PLC control, high automation of work. The structure is made of stainless steel. Sachet size: (L) 55~110 mm; (W) 30~80 mm, filling volume: 5-40ml, 1-20g.
Designed for washing, siliconization, sterilization and drying rubber stoppers. Suitable rubber stoppers: vial, infusion and oral stoppers. Sterilization temperature: 121 oC, applied vacuum: not more than 0.09 MPa. Capacity depends on the model and varies from 10,000 to 200,000 stoppers per batch.
