The machine uses straight bottle-feeding and is controlled by PLC. Applicable bottle diameter must be not more than 320 mm; bottle height must be within 250 – 450 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This machine is a protective automatic capping machine controlled by PLC. Applicable bottle diameter must be not more than 210 mm, bottle height must be not more than 320 mm. Cap diameter must be under 70 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic machine is suitable for sealing of disposable aluminum wring type anti-theft caps. Capacity is up to 4500 BPH. Applicable bottle diameter must be within 45 - 90 mm, bottle height must be within 180 - 320 mm. Cap diameter must be within 22 - 32 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
The machine can automatically operate a whole process of bottle sending, bottle cap unscrambling and cap covering. Capacity is up to 2500 BPH. Applicable bottle diameter must be within 25 - 90 mm; bottle height must be within 180 - 320 mm. Cap diameter must be within 20 - 55 mm.
This machine is an automatic liquid filling machine adopting low vacuum. It is mainly used for wine, soy, vinegar, seasoning, soup and foamy liquids. It fills liquid close the bottle wall, no foamy, making sure liquid level consistence. Applicable bottle diameter must be within 50 – 100 mm, bottle height must be within 200 – 370 mm.
The machine can be used for trilateral and four edge-sealing aluminum film bag packaged products. PLC controlled, parameters are set via HMI on a touchscreen. Capacity is 40 – 80 bags per minute. The produced bag must be within 60 – 140 x 70 – 180 mm in size. Maximal film roll diameter must be not more than 500 mm.
This machine is widely used in food, medicine, pesticide, daily chemical industry such as powder, liquid, particulate bag packaging. PLC controlled, parameters are set via HMI on a touchscreen. Capacity is 40 – 150 bags per minute. The produced bag must be within 60 – 218 x 70 – 225 mm in size.
The machine can be used for trilateral and four edge-sealing aluminum film bag packaged products. Capacity is 30 – 50 bags per minute. The produced bag must be within 50 – 110 x 50 – 130 mm in size. Maximal film roll diameter must be not more than 500 mm.
This machine suitable for prefabricate flat bag, doypack filling and sealing. PLC controlled, parameters are set via HMI on a touchscreen. Capacity is 30 – 60 bags per minute. The produced bag must be within 70 – 210 x 100 – 280 mm in size.
