This rotary tablet press is built as per the GMP directives with total robust construction. This state-of-the-art equipment can also be used for small batch production. Easy Movability, easy to Operate & Clean. Max. output: 25,200 tablets per hour.
Machine is totally enclosed, i.e. Top half of the machine Compression zone with S. S hood & transparent acrylic covers and Lower half of the machine complete with Mat finished S.S. covers. This reduces the noise level and to & fro flow of dust between compression zone and compression room. Anti vibration mounting pads are provided, hence no foundation is required.
Machine is totally enclosed, i.e. Top half of the machine Compression zone with S. S hood & transparent acrylic covers and Lower half of the machine complete with Mat finished S.S. covers. This reduces the noise level and to & fro flow of dust between compression zone and compression room. Anti-vibration mounting pads are provided, hence no foundation is required. Complies with GMP requirements.
Machine is totally enclosed, i.e. Top half of the machine Compression zone with S. S hood & transparent acrylic covers and Lower half of the machine complete with Mat finished S.S. covers. This reduces the noise level and to & fro flow of dust between compression zone and compression room. Anti vibration mounting pads are provided, hence no foundation is required. Complies with GMP requirements.
This compact unit is suitable for drying granular, crystalline, coarse or similar materials in Pharmaceuticals and related industries. In GMP models, all the contact parts made out of S.S.304 / 316 material & are provided with isolated panel board. Fluid Bed Dryer can be supplied in electric heating, steam heating or hot water circulation systems or gas heating system on demand.
The dryer is of robust construction built on formed angles of 3mm thick sheet and suitably reinforced with angles and sections. The dryers external walls are manufactured from 1.6mm thick Stainless Steel sheets of 304 quality. The internal of the dryer is built of 1.6 mm thick S.S 304 quality sheets.
Octagonal Blenders, due to its octagonal shape is designed to process to larger volume of material. it occupies less space compared to other similar blenders like ‘V’ and Double Cone. Power consumption is also less, the blending takes place at low speed during operation. Application: dry powder mixing for tablets and capsules formulations, dry granules sub lots mixing to increase the batch size at bulk lubrication stage of tablets and granules.
This Mixer has been well-designed to facilitate thorough mixing of dry or damp materials and is especially suitable for tablet granulation. The powerful geared drive and sturdy mixing paddle make RIDDHI Mixer ideal for dealing with difficult or sticky ingredients. This is one speed Mixer but two speed machine available on demand. All parts which are in direct contact with the material to be mixed are of S.S. or neutral material. All parts which are in direct contact with the material to be mixed are of S.S. or neutral material.
Multi Mill Machine is widely used for wet and dry granulation, pulverization, pharmaceuticals, chemicals, cosmetics, ceramics, colors, dyestuff, food products etc. It also finds application in pesticides, fertilizers, spices, detergents, insecticides. Unit consists of S.S. 304 quality hopper and processing chamber (can be provided is S.S. 316 quality at extra cost). Output: 50 – 200 kg/h.
The inspections machine is used to check Saline bottles cosmetically. The bottles are fed in tilted condition at a particular angle by channels provided at the input of the machine. Then the bottles are conveyed along with the indexing which leads to agitate the bottles, so the periphery of the bottles, bottom, sealing area & area checked through rear mirrors are visible to the magnifying lens, and related rejected bottles are ejected manually by the operators, and rest of the bottles are allowed to proceed further to the channels which exist the same for further operation.
