RBC Cardboard caser picks up specific number of products with arms and places into cardboard box. This is suitable solution for casing bag products into box and the pattern of accumulation can be suited on request. Systematic casing is possible when connecting with case making machine, or Vertical form fill, seal machine as pre-process.
The VR3000 fills a pre-set number of filled bags into cases, picking and placing them together. It is possible to use compact cases to suit your needs because the VR3000 neatly presses the filled bags one against another when filling the cases. When the VR3000 is coupled with a case-making machine, you can enjoy the convenience of a complete but compact packaging system.
This Auger filling system provides a capability to fill a container at high speed by combination with a Rotary conveyer. The maximum speed would be 200 fillings per minutes. It is also possible to build up a high accuracy filling system by adding a correction filling station after the initial filling. There are variety of optional devices to make your complete production line, such as container feeding, capping machine, labeling machine etc.
Vertical Form Fill Seal machine forms bag from film and fills an assortment of products such as powders, granules, and pieces, which come in a variety of shapes and kinds of foods such as candies, coffee beans, frozen foods and snacks by dropping vertically. Maximal capacity is 120 BPM.
This is a next-generation model, which has intelligent functions such as automatic film meandering correction device even in high-speed production, contamination detection by the end seal 2-axis servomotors, and film-end forecast & announcement function. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
The TWJB is an ideal model, combining both "made in Japan" quality with affordability. Designed with the aim of holding costs down, the high-performance model of the TWJB, which comes factory installed with major functions, can be used "as is" and achieve optimum cost performance. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
This Vertical Form Fill Seal Machine can be used to handle flat-bag, quattro-pack, and three-sided seal bag. It has robustness following the vertical pillow-pouch filling machine, and moreover, is capable of handling diverse product shapes and still fit within confined space. Changeover from flat-bag to quattro pack is easily possible by swivelling the end-seal unit. Applicable bag size must be within 40 – 95 x 45 – 130 mm.
This standard but very functional vertical form-fill-seal machine was created based on TAM's pursuit of exceptional film feeding and sealing performance. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements. Applicable bag size must be within 65 – 250 x 50 – 300 mm.
WTT is smaller in size compared to the TWN standard machine, being 140mm lower in height. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
This standard but very functional vertical form-fill-seal machine was created based on TAM's pursuit of exceptional film feeding and sealing performance. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements.
