The machine is simple and convenient to adjust, by adjusting the parameters on the touch screen; it can be used for many kinds of bottle capping work. The touch screen can store multiple groups of parameters, which can be changed directly when needed. Capping speed is 2000 – 2200 BPH.
This Rotary capping machine has compact structure, flawless control system, and is convenient to operate with high-grade automatism. Needs only to change the pinwheel, bottle entering screw and arched board when changing bottle models, with simple and convenient operation. Production Capacity depends on the model and varies from 4500 to 8000 BPH.
The machine is integrated with bottle feeding, sorting lid, screw cap and bottle discharging. Adopts the international advanced modular design ideas, mainly including mould feeding cover, servo control torque cap. In the process of capping, there is no damage to the bottle and no damage to the cap. With high capping efficiency, the capper is equipped with automatic stop without cap and automatic start with cap.
This function is suitable for a variety of geometric shape of the container, with a manipulator, cover speed, no back cover. The cover system works synchronously with the manipulator. When the cap is screwed tight, the bottle and the cap are relatively static, and the clutch is separated, so that the bottle and the cap are not damaged. The machine is suitable for three screw caps and some special bottle caps.
The high stability of automatic plastic bottle capping machine comes from the high standard design concept and strict processing requirements, as well as from the high standard of electricity and gas configuration; High degree of automation: the machine starts with one key and stops with one key. Easy to operate.
YG-620GS single-side automatic labeling machine for square bottles or flat shape objects, can be installed independent of plastic bodies. The machine is ideal for specialized cosmetics industry for automatic labeling of bottles and other irregular shape objects. Output is 80 – 200 pieces per minute.
This type of machine is suited for any round or cylinder bottles labeling. PLC controlled, parameters are set via HMI on a touchscreen. It is characterized by easy operating, easy reading, and good looking. The total machine is made of stainless steel and aluminium alloy, conforming to GMP standard.
This machine id widely applied in different industries, such as agrochemical, pharmaceutical, cosmetic and food industry for labeling circular bottles. If no bottle in the seat, the machine will stop until bottle comes to label. The type has many advantages like fast speed, low malfunction rate. Output is up to 120 bottles per minute.
This machine applies a label on the top of square bottles. High quality labelling, no wrinkles. You can start the label at the corner starting point, or you can start the label at the centre position. The machine can be used for production of health products, milk, honey and other products in bottles. Output is up to 160 pcs. per minute.
Applicable for round objects with smaller diameter which cannot stand when labeling, such as ampoules, vials, blood collection tubes, pens, sausage and so on. The labeling machine can be designed according to your needs. Labelling speed is 40 – 150 units per minute. Labelling accuracy is ±1 mm.
