Designed for packing products made of plastic, glass and/or metal into carton cases. PLC controlled, parameters are set via HMI on a touchscreen. The erected cases must be within 320 x 380 x 250 mm in size. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 500 L per minute.
Designed for carton case erection. PLC controlled, parameters are set via HMI on a touchscreen. The erected cases must be within 300 x 400 x 350 mm in size. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 800 L per minute.
Designed for packing products made of plastic, glass and/or metal into carton cases. PLC controlled, parameters are set via HMI on a touchscreen. The erected cases must be within 22 – 120 x 20 x 60 x 70 - 200 mm in size. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 200 L per minute.
Designed for packing products made of plastic, glass and/or metal into carton cases. PLC controlled, parameters are set via HMI on a touchscreen. The erected cases must be within 30 – 80 x 20 x 70 x 50 - 200 mm in size. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 200 L per minute.
Designed for packing glass, plastic and metal bottles into sleeve label made of PET or PVC. Applicable sleeve size must be within 50 – 140 mm x 30 – 60 mm. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 200 L per minute. PLC controlled, parameters are set via HMI on a touchscreen.
Designed for packing glass, plastic and metal bottles into sleeve label made of PET or PVC. Applicable sleeve size must be within 40 – 300 mm x 35 – 300 mm. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 300 L per minute. PLC controlled, parameters are set via HMI on a touchscreen.
Designed for packing glass, plastic and metal bottles into sleeve label made of PET or PVC. Applicable sleeve size must be within 35 – 130 mm x 40 – 300 mm. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 300 L per minute. PLC controlled, parameters are set via HMI on a touchscreen.
