BP-350A/250A/140A automatic platen Alu-PVC blister packaging machine can form plastic blisters, fill products, seal blisters to aluminum foil or dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 45 cycles per minute.
BP-250E/140E automatic platen Alu-Alu blister packing machine can form plastic or aluminum blisters, fill products, seal blisters to aluminum foil and dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 45 cycles per minute.
BP-250D automatic platen Alu-PVC-Alu (tropical aluminum) blister packing machine can form plastic or aluminum blisters, fill products, form aluminum foil, seal blisters to aluminum foil or dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 45 cycles per minute.
Automatic PVC sheet feeding, blister forming, blister cutting, feeding, blister card sealing in one unit. PLC controlled, parameters are set via HMI on a touchscreen. Widely used in battery blister packing, cosmetic products blister packing, electronic products blister packing, etc. Output is 20 cycles per minute.
Suitable for blister-to-blister sealing. Automatic blister forming cutting sealing in one line. Widely used for different products in blister packing. Suitable for stationery, electronics, toothbrush, batteries, toys, gifts, hardware, tools with plastic-plastic or plastic-card packaging. Production capacity is 15 strokes per minute.
The machine is used for battery blister packaging, cosmetic products in blister packaging. Forming area is 500 × 180 mm. Forming depth is 35 mm. Output is 20 cycles per minute. The blister-packing machine is equipped with the clutch to shut down the machine when any fault. Therefore, the machine never muddle up in production.
The design structure of DPP-260 series automatic blister packing machine is meeting the standard requirements of GMP, cGMP and the design principle of ergonomics. It adopts advanced smart driver and control technology.
DPP-180 is a high-speed al/plastic blister-packaging machine, which can pack products into blisters. The machine is used in pharmaceutical industry to pack tablets, capsules, packaged food, small metal parts and electronic components. Capacity is 6000 – 14000 blisters per hour. It can be equipped with water cooling system. Maximal forming depth is 25 mm.
This blister-packing machine is specially designed for dosage room of hospitals, middle or small pharmaceutical and nutrition products factory. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa. Capacity is 1200 – 4200 blisters per hour.
This machine is designed to pack products in the pharmaceutical industry (tablets, capsules) food industry, small metal parts and electronic components. Cutting speed is 10 – 40 times per minute. Blister material is ALU/PVC.
