Single shrink label for the tray, microcomputer automatic control, automatic detection, automatic positioning, for fast, effort, cut off the precise location. This machine uses a high-speed machine equivalent PLC and positioning module and servo motor and inverter, touch screen automatic control, simple operation. Can work with round, square, flat and curved bottles.
This machine is specially designed for applying a sleeve-label. First, a label is put on the bottle and then under the influence of the hot air pressure, it "envelops" the container, completely repeating its shape. The productivity of such a machine can reach: 90,000 bottles per hour.
This machine is specially designed for applying a sleeve-label. First, a label is put on the bottle and then under the influence of the hot air pressure, it "envelops" the container, completely repeating its shape. The productivity of such a machine can reach: 150,000 bottles per hour.
This machine adopts international advanced technology, cover the circle label on the bottles. After that hot shrinking fixes the position of the label. It is controlled by microcomputer, automatic detection and position. Output is 60 – 100 bottles per minute.
This machine is used to put the sleeve label on the bottle and then shrink it. It is a popular packaging machine for bottles. New-type cutter: driven by stepping motors, high speed, stable and precise cutting, smooth cut, good-looking shrinking; matched with label synchronous positioning part, the precise of cut positioning reaches 1mm.
Designed for packing glass, plastic and metal bottles into sleeve label made of PET or PVC. Applicable sleeve size must be within 50 – 140 mm x 30 – 60 mm. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 200 L per minute. PLC controlled, parameters are set via HMI on a touchscreen.
Designed for packing glass, plastic and metal bottles into sleeve label made of PET or PVC. Applicable sleeve size must be within 40 – 300 mm x 35 – 300 mm. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 300 L per minute. PLC controlled, parameters are set via HMI on a touchscreen.
Designed for packing glass, plastic and metal bottles into sleeve label made of PET or PVC. Applicable sleeve size must be within 35 – 130 mm x 40 – 300 mm. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 300 L per minute. PLC controlled, parameters are set via HMI on a touchscreen.
Designed for shrink labeling all kinds of bottles, such as round bottles, square bottles, flat bottles, curved bottles, cups and so on. PLC controlled, parameters are set via HMI on a touchscreen. Body is all covered with stainless steel: water proof and no rustiness. Adjustable knife plan: original creation, double side edge of knife, long service time.
