This machine is equipped with automatic perform loading and bottle unloading system. It is applicable for all shapes of drinking water bottles, carbonated bottles and hot filling bottles. FG4 is composed of three modules: preform elevator, preform unscrambler and host machine. To operate the machine needs compressed air with a pressure of 30 Bars.
FG-8Y1 semi-automatic bottle blow moulding machine is suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle, oil bottle, cosmetics bottle, wide-mouth bottle etc. Output is 600 – 900 BPH.
FGA4 Full automatic blow moulding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Output is 3200 – 4000 BPH.
PET Plastic raw materials to make bottle embryo, and then blowing. The commonly used is the environmental protection plastic PET material. Using the machine to blow out of the wind, blowing PET plastic body attached to a certain shape of cavity. Produces bottles with capacity 200 – 2000 ml.
PET Plastic raw materials to make bottle embryo, and then blowing. The commonly used is the environmental protection plastic PET material. Using the machine to blow out of the wind, blowing PET plastic body attached to a certain shape of cavity.
ES series is one kind of two-step automatic PET bottle blow molding machine, which is suitable for blowing any shape of PET bottles such as carbonated water bottles, water bottles, juice bottles, oil bottles, cosmetic containers, etc. To operate the machine needs compressed air with a pressure of 0.8 – 1 MPa.
ES series, two-step method fully automatic blow moulding machine is the most stable machine in our company. The maximum capacity is 1.5L, suitable for blowing with PET as raw materials of any shape carbonated beverage bottles, mineral water bottles, cosmetics bottles and packaging container. To operate the machine needs compressed air with a pressure of 0.8 – 1 MPa.
ES-A2 is applicable for blowing the carbonated beverage bottles, mineral water bottles, farm chemical bottles, oil bottles, medical, hot-filled bottles in any shapes and made of PET, PP or PE. Controlled by PLC, parameters are set via an advanced touch-screen.
ES-A2 is applicable for blowing the carbonated beverage bottles, mineral water bottles, farm chemical bottles, oil bottles, medical, hot-filled bottles in any shapes and made of PET. Controlled by PLC, parameters are set via an advanced touch-screen.
