The Turbine Series tunnels are designed with energy conservation in mind. The machines are built with high quality fiberglass finalization. The machine uses a unique turbine heat circulation system to not only conserve energy but also create a very nice and even shrink. The machine can be adapted to existing sealing systems or used in line with our wide range of equipment.
This machine allows one person to form, pack and seal cases in one operation. The operator opens the flat case and places it into the erector. The machine folds the bottom flaps ready for packing. After packing, the operator presses the foot-switch or push-button. The machine automatically pushes the case into a case sealer, saving time and labour costs.
ZS vibrating Sifting Machine is composed of sieve box, vibration source and shock absorber. Vibration frame and screen box connected with rubber shock absorber fixed up and down, the production of centrifugal force, by the shock absorber control floating amplitude, so that the material has a downward shock throwing and downward stratified filtering process, so as to achieve a better classification screening effect. Capacity(kg/h): 200-2500
This Sifting Machine is applied for the sorting of the granule size of dry power material in the trades medicine, chemical and foodstuff etc. The Sieving Machine is composed of the vertical vibration motor a sieve bottom a mesh frame sieve room rubber vibrating bowl and all fastening pieces, etc. Capacity(kg/h): 100-800
Vibrating Screener machine is a kind of high-precision fine powder Screening Machine with low noise and high efficiency. Electric Sifting Machine is designed for accurate grading or sizing of wet and dry materials up to five fractions in one operation. The Sifter Machine is closed structure, its screen replacement is convenient, easy to operate, the machine is made of high quality stainless steel, suitable for a variety of industries. Capacity(kg/h): 200-1500
Full-automatic work, by aluminum foil reel and release material tape, simultaneously punching and insert to cap automatically. Including Missing Foil Detection Module, 12 Liter Pneumatic Barrel, Emergency Stop & Optical Fiber Detector. To check that the product has had a cap fitted with an induction foil.
The machine is designed for inserting neck handles for low, medium and high production speeds. When blowing out large bottles (> 2L) in a two-stage process, it is not possible to blow into the bottle itself with the handle. Therefore, external plastic handles can be used instead of the blown handle.
This cap assembly machine can assemble all kinds of plastic bottle caps, and can smoothly assemble the inner and outer parts of ejector caps, implosion caps, caps with explosion-proof rings and anti-counterfeit tooth caps. To operate the machine needs compressed air supply with a pressure of 0.4 – 0.6 MPa.
This cap lining machine is widely used in food and pharmaceutical industries, where it is necessary to insert the double-layer pads (aluminum foil and paper) into the bottom of the caps. The specially designed mold can produce a pulled piece on the aluminum foil to be easily opened.
The machines are widely used in pharmaceutical, food and chemical factories, oil plants, packing plants and other productions. It is suitable for all sizes of threaded PET lids. A combination of various complex caps, mainly consisting of edible oil, pesticides, everyday chemicals, beverages or water and other caps that require manual replacement.
