The monoblock is designed for dosed filling of drugs into bottles, as well as for stoppering the bottles. The unit may be used at pharmaceutical and veterinary plants. Monoblock meets all GMP standards. Output is 2,000 pcs/h.
Monoblock "Master” for oils and alcohol-containing products is intended for filling products into containers, stoppering and subsequent labeling the containers1. The unit is used by enterprises in the cosmetic and pharmaceutical industries. Output is 1100 pcs/h.
The filling&sealing monoblock of this model is designed for dosed supply of liquid and medium-viscosity products into containers, orienting caps and capping bottles. The unit is used in perfumery and cosmetic production for production of cosmetic oils in glass and PET bottles. Output: 1000 - 3000 pcs/h.
Monoblock "Master-Pharm" MZ-400ED for filling and capping veterinary preparations is intended for dosed feeding of the product into 100, 250 and 450 ml bottles, orienting stoppers and caps, as well as rolling caps. The main scope of this equipment is the production of animal medicines. Compliance with the requirements of the GMP standard also allows the use of this installation in the pharmaceutical industry. Output is 1000 - 3000 pcs/h.
The “Master” filling line is designed for filling, stoppering and labeling vials with pharmaceutical and veterinary products. The unit may be used at pharmaceutical plants. It is made of AISI304 and AISI316L stainless steel, medical caprolon; piping is in medical silicone. The machine corresponds to cGMP. Output is 2,000 pcs/h.
The line for oil filling is designed for complex solution of the problems of dispensing the product, orienting the lids (2 sizes), capping glass and plastic containers of 30, 50 and 100 ml with aluminum screw and plastic caps at the same time, with minimal readjustment (2 capping heads) as well as subsequent labeling and marking containers. The machine is used to equip food, cosmetic, pharmaceutical, veterinary and chemical enterprises. Output is 2,000 pcs/h.
The line is designed for filling alcohol products in glass or plastic containers of 30, 50 and 100 ml, capping containers with aluminum or plastic screw caps (2 sizes) and applying labels. The machine is used in the pharmaceutical, cosmetic, food and chemical industries. Output is 2,000 pcs/h.
The line for alcoholic tinctures is designed to rinse and dry containers, dispensing products into vials with their subsequent sealing with plastic caps and labeling. The line meets all the necessary requirements of GMP and GPP and can be used in pharmaceutical and cosmetic production. Output is 5,000 pcs/h.
The line is designed to implement the full cycle of packaging hot syrups and toppings into bottles - rinsing containers, filling the product and capping it with subsequent unloading on a storage table. The unit is designed for food industry companies, but can be adapted for usage in pharmaceutical industries, cosmetic factories and other industrial areas. Output is not more than 2,000 pcs/h.
This filling line is the best solution for equipping small and medium pharmaceutical industries. The machine is designed specifically for filling drugs and meets the regulatory requirements of GMP (GOST R 52249-2004) for medical equipment. The modularity of the architecture allows operation of the dispenser, capper and washer both as a part of the line and as stand-alone units. Output is 1,000 pcs/h.
