Table top. Bottom heated solid conveyor belt. Heat ducted to top & sides. Thermostatic temperature control. Variable speed 0-30 fpm conveyor. Standard single plug for portability. Durable electro-static powder finish. 2900 watts of available heat.
Half-stack pallets are placed into the depalletizer frame using a forklift or pallet jack. Once inside the frame, the operator will cut and remove the shrink wrap, exposing the top layer of bottles. An operator interface will allow the user to start the process, and the pallet will be raised to the correct level so that the base of the top layer is level with the feed table. A motorized pusher bar will engage and push bottles out onto the feed table, starting and stopping as bottles are needed. Bottles will transfer out onto the feed table, and from there be fed onto the right-angle conveyor. The table, conveyor and pusher belt turn on and off automatically based on a downstream photoeye indicating the need for bottles. If the line is full the system waits until bottles are needed and then restarts.
Compact structure design, small size, does not take up space, easy to move, not limited by the region. Materials can be closed transportation, screening, reduce labor intensity, no dust, low noise, clean production process and environmental protection.
The Automatic Desiccant Inserting Machine has strong compatibility, suitable for all kinds of specifications, all kinds of round, oval, square, flat, square bottles. Production capacity is 50 – 120 bottles per minute. The machine is reliable and durable, high shear does not cut off the drying bag.
Fast drying, the temperature could be strictly controlled during drying to assure the quality of material after drying. With a stirring knife, designed horizontally for big granules or lumpish material, for fast drying and to avoid sticking to the wall. Works at negative pressure with smooth and clean inside surface without dead corner, convenient for cleaning to meet requirements of GMP.
PLC controlled, parameters are set via HMI on a touchscreen. The machine is equipped with counting and display functions. The transmission system structure is simple, operates stably and is fitted with a shutdown device when there are no bottles. The machine activates automatically when bottles are detected.
The machine is suitable for products that require rapid heating for sterilization, drying and cooling after sterilization. The system consists of forced convection fan and air deflectors. Under the strong driving of the fan and the guidance of air deflectors, the high temperature mixed sterilization medium (pure steam and clean air) in the sterilization chamber forms vortex airflow which flows evenly through the products for heating and sterilization.
The machine is mainly used for drying powder or granules from pharmaceutical, foodstuff, chemical and so on industries. Fluid bed achieves fast heat transmission of medium. Seal negative pressure operation, there is no dust. The machine is in conformity with the requirements of GMP.
