Polypack’s PH series shrink wrapper uses a main pusher and seal bar designed for wrapping individual products as well as for collating products into multipack configurations. The PH series shrink wrap machines are available with various infeed and collation modules. The PH series shrink wrappers are also available with an integrated pad dispenser to create pad-supported shrink packs.
Polypack’s IL series inline shrink wrapper is designed to provide a bullseye wrap to products longer than 4 inches. These shrink wrap machines have belt-to-belt transfers, controlled by motor inverters for positive transfers. The IL series shrink wrapper can be installed at the end of a tray multipacker to shrink wrap each tray after they are formed and loaded.
1812-MTB-II packaging machines are semi-automatic L-Bar sealers that come in a wide range of sizes 18″ x 12″ seal area for all of your packaging needs. The product is fed manually with the film and the operator presses the sealing bar down. An automatic conveyor transports the sealed product into the shrink tunnel which allows the operator to have the next product ready for sealing.
4530-MTB-II packaging machines are semi-automatic L-Bar sealers that come in a wide range of sizes 45″ x 30″ seal area for all of your packaging needs. The product is fed manually with the film and the operator presses the sealing bar down. An automatic conveyor transports the sealed product into the shrink tunnel which allows the operator to have the next product ready for sealing.
3520-MTB-II packaging machines are semi-automatic L-Bar sealers that come in a wide range of sizes 35″ x 20″ seal area for all of your packaging needs. The product is fed manually with the film and the operator presses the sealing bar down. An automatic conveyor transports the sealed product into the shrink tunnel which allows the operator to have the next product ready for sealing.
2420-MTB-II packaging machines are semi-automatic L-Bar sealers that come in a wide range of sizes 24″ x 20″ seal area for all of your packaging needs. The product is fed manually with the film and the operator presses the sealing bar down. An automatic conveyor transports the sealed product into the shrink tunnel which allows the operator to have the next product ready for sealing.
2016-MTB-III packaging machines are semi-automatic L-Bar sealers that come in a wide range of sizes 20″ x 16″ seal area for all of your packaging needs. The product is fed manually with the film and the operator presses the sealing bar down. An automatic conveyor transports the sealed product into the shrink tunnel which allows the operator to have the next product ready for sealing.
Automatic sleeve sealing machine with shrink tunnel is suitable for shrink packaging of the beverage, beer, mineral water, pop-top cans and glass bottles etc without tray. Automatic sleeve sealing machine with shrink tunnel is designed for packing single product or combined products without tray. The equipment can be connected with the production line to complete feeding, film wrapping, sealing & cutting, shrinking and cooling automatically.
It is an economical fully-auto operation L sealer by our company’s independent research and development, which is widely used in mass production assembly line with auto-feeding, conveying, sealing, shrinking in one time. It is high working efficiency and suits for the products of different height and width.
The machine is suitable for packing long items, such as wood, aluminum, etc.. PLC controlled, parameters are set via HMI on a touchscreen. Use side sealing design, no limited of product packaging length, the sealing line height can be adjusted according to the packing product height. Equipped with imported detection photoelectric, horizontal and vertical detection in one group, easy to switch selection.
