This Machine is suitable for mixing all kinds of dry powders. PLC controlled, parameters are set via HMI on a touchscreen. The whole body is made of stainless steel. The Machine is high efficient, using it results in homogeneous mixing. The cover of the tank can be made as open in order to cleaning and change parts easily.
The machine is suitable for mixing the powder and grain state materials in pharmacy, chemical, food, building material and other industries. The powder is loaded through the vacuum conveyor for the machine. It can be loaded manually as well. It is energy saving, easy for operation, the labor intensity is low, and the working efficiency is high.
This mixer mainly consists of three big parts, rotating cylinder, swinging rack and frame. The rotating cylinder lies on the swinging rack, supported by four wheels and its axial fixation is done by two stop wheels. Two of the four wheels are driven by rotating system to make the cylinder rotate.
The mixing barrel of the machine moves in multi-direction. For the materials, there is no centrifugal function, without the specific gravity segregation and the layer division. For each of build-up phenomenon, there is the remarkable weight rate. The mixing rate is high. The machine is the desired one of various mixers at present.
Materials are charged into a closed square-cone mixing barrel, the symmetrical axes of hopper and the axes of rotating shaft form an included angle, materials with different constituents are strenuously rolling over in the closed hopper and producing high shear to achieve the best effect of mixing.
The Self-rotation of this machine is achieved by a set of motor and cycloid pinwheel reducer, non- Symmetry blending is achieved by two sets of screws as to let the large area mix and have fast mixing. It is especially used for mixing the materials with big difference of bulk density and mixing proportion.
CH type mixer is widely used for mixing powder or wet raw materials and can make the main and auxiliary raw materials with different proportion uniform. It can prevent from the raw material leakage. It is widely used in pharmaceutical, chemical, foodstuff and so on industries.
V type dry powder mixer blending machine is suitable for use in the pharmaceuticals, chemical and food industries for mixing powder or granular materials. The cylindrical structure is the distinguishing feature and the mixing ability is well-proportioned and efficient with no blind spots in the cylinders and no accumulation of materials.
This machine adopts inside and outside rotary stirring, high uniformity. With automatic timing device, can be set 0~60 minutes automatic stop. Using the principle of gravity diffusion mixing, the pressure feed to the material is small, will not produce shear crushing of the material. Application: Powder, Medicine Processing, Chemicals Processing, Food Processing. Max. loading volume: 600L
Double screw ribbon Blending Machine Industrial Blender for powder is a mixing equipment with high efficiency, high uniformity, high loading coefficient but low energy cost, low pollution and low crush. Application: Medicine Processing, Chemicals Processing, Food Processing, Powder. Max. Loading Volume (L): 400
