The machine is used for labeling varied square bottles for food, medical purpose, cosmetics and petrochemical use and is equipped with an advanced HMI operation, PLC control. Hand wheel adjusting knob, convenient adjustment, and simple use. Step drive, allowing labelling speed at up to 80 bottles/min; label dimension is 15-120 (W) x 15-350 mm (L).
The machine is used for labelling of glass bottles, it has an integrated control panel, made of 304 stainless steel and aluminium alloy. Simple adjustment of labels and labelling speed, the machine is equipped with photoelectric detection of labels. Labeling speed is at up to 80 bottles/min; label dimension is 40-100 (W) x 50-220 mm (L).
The machine is used for labeling flat and round surfaces. It is controlled by a PLC pneumatically and electrically, easy to operate economically and practically. Label dimension is 12-100 (W) x 15-125 mm (L).
HG series machines are designed for hot glue labeling of plastic bottles. Operation and maintenance are very simple, the design is optimal minimizing number of wearing parts. The machine can be configured for different bottles and labels. Output depends on the model and bottle type and can vary between 135 – 300 bottles per minute.
This machine is designed for cold glue labeling of glass and metal cylinder type containers. Labeling material is paper, can work with casein glue or chemical compositive glue. Speed of labeling is 100 bottles per minute.
VPC-JD-2 Double Side Automatic Wet Glue Labeling Machine with wet glue uses a fully mechanical drive. The load on the engine is low, the panel and drive tape for transferring the discs are made of stainless steels that are strong, clean and easy to maintain. The machine occupies a small space and can move freely in the workplace.
It is easy to adjust the label-cutting knife and the vacuum drum is made of high rigid material to minimise friction and static. Rapid changeovers: modular design and quick release change parts have changeovers fast and easy in ten minutes. Applicable bottles: variety of bottles dia.35-115mm
Designed for hot shrink labeling of bottles in food & beverage industries, producing fruit juice, tea drink, dairy products, pure water, condiments, beer and sports drink, etc. of all kinds of bottle types. The velocity of this type machine reaches within 350-450 bottles per minute.
The machine is widely used in various specifications of circumferential surface labeling, taper round bottle labeling, also would add two side or surface labeling head, for two side labeling use as well. Applicable label must be within the size of 15 – 290 x 15 – 150 mm.
