Lined sealing and stitching automatic packaging machine fit for packaging of single layer Kraft paper, multi-layer Kraft paper, and paper/plastic laminated bag. It could automatically finish the processes of dust-clean, stitching, thread-cutting, trimming, binding the edge, cutting off, heat seal, pinching, count etc.
Increased capacity and output volume of pralines and chocolate based products can be obtained by means of a cooling tunnel. Once moulded or enrobed products enters the conveyor on the cooling tunnel there is an open length of 1.0 m for manual or mechanical decoration of the products. In the end of the cooling tunnel is an open packing table of 1 m.
The open stainless steel framework provides easy access for thorough cleaning. No need tools to remove the conveyor, simplifying clean-up procedures and reducing clean-up time. The memory card can store up to 100 operating parameters to minimize operator errors and reduce production downtime during changeovers. Weighing range is 30 – 1000 g.
HAB Series bottle dryer is designed to remove excess water droplets from the surface of bottles. In a hot filling line, containers are spray cooled to a temperature close to ambient temperature for packaging purpose. HAB Series is integrated with low energy consumption but high volume output air blower for effective bottle drying. The length and number of air blowing tubes can be customized for different line specifications.
Designed for production of plastic bottle caps at a high speed. Fully automatic, controlled by PLC. Minimal cap diameter is 25 mm, maximal — 30 mm. Equipped with temperature deviation alarm. To operate the machine needs compressed air with a pressure of 0.8 MPa.
Designed for production of plastic bottle caps at a high speed. Fully automatic, controlled by PLC. Minimal cap diameter is 25 mm, maximal — 45 mm. Equipped with temperature deviation alarm. To operate the machine needs compressed air with a pressure of 0.8 MPa.
This machine is mainly used for the manufacture of gaskets for plastic caps. It is compact, efficient and easy to operate. The gasket made with it is smooth and beautiful. The bottle cap with it is easy to open and tightly closed, preventing the leakage of water and gas. In addition, it complies with the national food hygiene standard and has a similar performance with imported caps and molding machines.
The feeder is designed for temporary storage and transferring dry, free-flowing food and non-food products to bucket elevator. Its design with fully stainless steel structure makes sure the machine fits the most demanding applications The durability, ease of cleaning are good choice for food industries. Production capacity is 3 – 5 m3/h.
The GF series can remove the cap ranging in size from 3 to 5 gallons at speeds of 100-900 bottles per hour. Another design advantage is that there is no need of highly trained operator or service personnel. Setting the controls is easy and the controls are ergonomically positioned.
