Used for a variety of cosmetics, pharmaceuticals, veterinary drugs, pesticides, lubricants industry bottle cap machine equipment. Compact and reasonable, it can be easily connected to other equipment. Applicable bottle diameter is 30 – 300 mm. Production capacity is 40 – 60 bottles per minute.
FXG-1 Automatic Tracking Type Capping Machine is making up with the bottle unscramble & conveyor, cap gripper & capping structure, moving mold, conveyor structure and control system. This capping machine is with simple structure and easy adjustment. It is used for the automatic capping for 5-30 L drums.
This automatic capping machine is suitable for bottles conveyed in a straight line and then capping. Suitable for Plastic/Glass covers of different sizes and shapes, duckbill caps, spray gun caps, straw type pump caps, etc. Widely used in Cosmetics, food, beverage, daily chemical, pharmaceutical and other industries.
Servo motor is used to drive the turntable, which has the characteristics of simple structure, stable operation and low noise. One-key startup, the turntable will automatically reset after booting to ensure the normal operation of production. Jammed tank shutdown alarm function: effectively avoids mechanical structure damage caused by jammed tank.
This Capping machine is single capping-head design, suitable for common flat screw caps. A capping head can be replaced for different sizes of cap. Color touch screen is used for convenient machine operation. Servomotor controls capping torque precisely to avoid damaging cap’s surface. Production Capasity: 20 pcs/min
This side-warp capping machine is suitable for both normal round screw caps and various specialty caps. The automatic cap feeding device reduces much labor cost and production time, also increases daily production volume because manual cap feeding is not required. Color touch screen is used for convenient machine operation. Production Capasity: 30-40 pcs/min
Designed for capping cans with plastic lids with speeds between 60 and 70 cans per minute. Can work with cans 60 – 160 mm in diameter and 50 – 260 mm in height. To operate the machine needs compressed air supply with a pressure of 6 kg/ m2.
This In-line Structure Capping Machine is making up with cap sorter, cap falling rail, bottle-tightening structure and capping wheels. It applies to the capping of round and flat bottles. This capping machine is with easy structure and adjustment. When changing the bottle type, you do not need to change the format part, only adjustment is enough.
Designed for capping with plastic caps various bottles, jars, atomizer bottles, etc. Widely used in cosmetic, drinks, chemical, medical, food industry etc, which can highly improve productivity and product quality. Frequency control, stable and safe. Easy setting, good appearance and practical functions.
The perfume-crimping machine is a kind of clamping type cap-closing machine. It is suitable for cap closing of spray type caps. The machine use the clamp to close the cap and fasten it on the edge of bottle mouth. The whole machine is composed of machine body, table surface, clamping device and pneumatic control system. Output is 10 – 40 bottles per minute.
